Creating a hotspot or access point did not really make a difference denganm make the router, but on the plus to enable wireless and DHCP server on our router. But of course the equipment and complete facilities on the router to support the access point. So this means access point router to function as a server router, DHCP server and the wireless transmitter.
A. The first step is to install 2 dilakuakan yitu the first cable from the cable ISP WAN coming into the area and the cable leading to the client is installed on the LAN area (usually more than one for the LAN port)
2. Once the cable is then plugged into the new setting process is to open the internet browser on a client PC. Then to type defaults to IP 192.168.0.1 so there is no user name and password. The contents of the admin user name and password then leave blank and enter
3. after the user name and password are entered correctly and then display the following:
4. To change the defaul password can be done on the Tools tab, the goal that not everybody can change the access point settings that we make.
5. Selanjutanya wirelessnya facilities in the switch to activate it then transmitting radio ggelombang already in the switch so that the wireless adapter from the PC client can catch this wave. By giving the name of our wireless connection on the Network ID Colom. Might also be given password protection for not everyone can enjoy the hotspots that we make in security field
6. Then on the WAN means the part that connects to the router maupaun ISPnya in the upper level. Is the static IP-enabled IP routers and IP addresses for example 10.63.41.1 then it must be parallel to the ISP's such as 10.63.98.7 and 10.63.98.1 gateway on the content and then also in the content DNSnya ISP DNS is concerned.
Filling in the WAN
7. Then on the LAN is the connection to the client can be set to IPnya but when adjusted for defaulnya be 192.168.0.1 and the client IP as long as its parallel mennyesuaikan.
8. Hotspot facility that can be enjoyed immediately without any direct connection to the computer clinet IP setting is to enable DHCP server. On the DHCP live to be enabled the DHCP server.
9. Then the client live a tool set for the wireless adapter to receive radio signals from the access pointnya. For today's notebooks are equipped with wireless adapters. If not you can add an external tool such as the following figure:
10. Then on the client PC if there is a direct wireless connection will show up and stay in connectkan on the one that we want. Connection with the notes to hotspots that are often used in TCP / IP wireless adapter that is used is left aotomatic.
No comments:
Post a Comment